EasyManua.ls Logo

COMETA WAVE PLUS - Footswitches Module Specifications; Docking Module and Power Supply

COMETA WAVE PLUS
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WAVE PLUS - USER MANUAL
COD. WPMEMG
REV 01
02/11/2011
DATA PRIMA EMISSIONE
Pag. 36 di 37
Stand by time (100% charged battery) > 180 gg.
EMG input +- 2.5 mV
bandwidth 10 Hz 500 Hz (or 1 KHz)
sampling 16 bit 2 Ks/sec.
ACC sensitivity (SW selectable, full scale) ±2 g, ±4 g, ±8 g, or ±16 g.
bandwidth DC 70 Hz
sampling 10 bit 142.8 s/sec.
Max. allowed acceleration 10,000g
Dimensions 33 x 23 x 19 mm.
Weight 12 gr.
FOOTSWITCHES Module
Transmission / Reception frequency 2402 2480 MHz
Transmission power (ARP) 0,45 mW
Number of FSR sensors 4
Power supply voltage 4 Vcc
Absorbed power 40 mW
Operating temperature range 0 + 50 °C
Full charge operation time (100% charged battery) > 12 h
Stand by time (100% charged battery) > 180 gg.
FSW input for piezoresistive sensors
Dimensions 33 x 23 x 19 mm.
Weight 12 gr.
Docking Module
Recharging capacity 20 modules
Power supply voltage 9 V +- 10%
Maximum absorbed power 13.5 W
Recharging time 7.5 h (auto shut off)
Dimension embedded into the Wave
Plus briefcase
Net feeding
Power supply voltage 100 240 V 50/60 Hz
Output voltage 9 V cc, 1,5 A