COMETA WAVE PLUS - TECHNICAL SPECIFICATIONS; Base Unit Specifications; EMG Module Specifications

WAVE PLUS - USER MANUAL
COD. WPMEMG
REV 01
02/11/2011
DATA PRIMA EMISSIONE
Pag. 35 di 37
7. TECHNICAL SPECIFICATIONS (WAVE PLUS 16 CH)
Base unit
Transmission / Reception frequency 2402 – 2480 MHz
Transmission power (ARP) 0,45 mW
Number of channels (16 EMG + 48 ACC + 2 FSW) 66
Power supply (stand alone, external wall plug medical grade SMPS) 9 Vcc +- 10%
Power supply (PC connected) via USB
Absorbed power 2 W
Operating temperature range 0 + 50 °C
Input:
Start trigger TTL, max ±10 V
Trigger out TTL, max ±10 V
Output:
EMG Output ± 2,5 V, Zout = 100 ohm
ACC Output ± 2,5 V, Zout = 100 ohm
FSW Output 16 levels, max 3 V
Host USB link: USB 2.0
Gain (EMG channels) 1.000 (1V/mV)
Dimension 155 x 105 x 50 mm
Weight 300 gr.
EMG Module
Transmission / Reception frequency 2402 – 2480 MHz
Transmission power (ARP) 0,45 mW
Power supply voltage 4 Vcc
Absorbed power 40 mW
Operating temperature range 0 + 50 °C
Full charge operation time (100% charged battery) >12 h