Comfort COMPASS - Power Chair Compatibility; Height Guide

6
INSTALLATION & SET UP www.comfortcompany.com
COMPATIBILITY & HEIGHT
Compass
®
Power Mount Hardware is compatible with the chairs listed below using only the seating systems specied.
The power bases listed are a reference for what is available with the compatible seating system.
Each chair manufacturer has a suggested “back gap” for setting the height of the back support on the chair. This allows for the
power chair components to articulate as intended (always test before using). Please see the height guide charts below*.
POWER
MOUNT
HEIGHT
GUIDE
QUANTUM
®
WITHOUT RECLINE
QUANTUM
®
WITH RECLINE
Recommended
CC BACK SUPPORT
LENGTH
Recommended
CC BACK SUPPORT
LENGTH
BACK HEIGHT
30”
BACK GAP = 7”
22 L
ADJUSTMENT = -3”, +5”
28”
20 L
26”
BACK GAP = 3”
22 L
ADJUSTMENT = -3”, +5”
18 L
24”
20 L 16 L
22”
18 L 14 L
20”
16 L 12 L
18”
14 L
16”
12 L
POWER
MOUNT
HEIGHT
GUIDE
PERMOBIL
®
QUICKIE
®
Recommended
CC BACK SUPPORT
LENGTH
Recommended
CC BACK SUPPORT
LENGTH
BACK HEIGHT
30”
BACK GAP = 7”
22 L
ADJUSTMENT = -2”, +6”
28”
BACK GAP = 6”
22 L
ADJUSTMENT = -4”, +4”
20 L
26”
20 L 18 L
24”
18 L 16 L
22”
16 L 14 L
20”
14 L 12 L
18”
12 L
16”
BACK HEIGHT = Overall dimension from seat base to top edge of back support.
BACK GAP = Manufacturer recommended dimension from seat base to the bottom
edge of the back support. Recommended gap is identical for all back supports.
ADJUSTMENT = Available height adjustment range after recommended back gap.
(½” increments)
Seat Base
Back Gap
Back Gap
CC Back Support Length
CC Back Support Length
Back Height Back Height
Seat Base
ACTA-BACK
®
& ACTA-EMBRACE
®
Models
ACTA-RELIEF™
Models
*ROVI
®
suggested back gap is 4” (10.2cm) for tilt systems and 6” (15.2cm) for
recline systems. Recommended CC Back Support Length and Adjustment infor-
mation depends on where the holes are drilled in the Recessed Planar Interface
Plate during installation.
(76.2cm)
(71.2cm)
(66.0cm)
(60.9cm)
(55.9cm)
(50.8cm)
(45.7cm)
(40.6cm)
(76.2cm)
(71.2cm)
(66.0cm)
(60.9cm)
(55.9cm)
(50.8cm)
(45.7cm)
(40.6cm)
PERMOBIL
®
with
Corpus
®
3G Seating System
QUICKIE
®
with
3.7 Power Recline Seating System
QUANTUM
®
with
TRU-Balance
®
3 Seating System
ROVI
®
with
Motion Concepts Seating System
M400 Corpus
®
QM-710™ SC Q6 Edge
®
Note: A Recessed Planar Interface Plate
must be installed on the chair.
M300 Corpus
®
QM-710™ MPC Q6 Edge
®
X
C350 Corpus
®
QM-715™ HD MPC Rival
®
X3
F3 Corpus
®
QM-720™ MPD
F5 Corpus
®
PULSE™ 6 SC
PULSE™ 6 MPC
POWER BASES AVAILABLE
COMPASS
®
POWER MOUNT COMPATIBILITY