Need help?Do you have a question about the Commell LV-679 and is the answer not in the manual?
General| Form Factor | Mini-ITX |
|---|---|
| Operating Temperature | 0°C to 60°C |
| Power Supply | ATX |
| CPU | Intel Core i7/i5/i3, Pentium, Celeron |
| Expansion Slots | 1 x PCIe x16 |
| LAN | 1 x Gigabit Ethernet |
| Audio | HD Audio |
| Serial Ports | 2 x RS-232 |
| Video Output | 1 x HDMI |
| Power Input | 12V DC |
Overview of the LV-679 Mini-ITX motherboard and its features.
Detailed general specifications of the motherboard, including form factor, CPU, and memory.
Lists different ordering codes for the motherboard variants.
Provides dimensional information and layout of the motherboard.
Illustrates the functional blocks and connections on the motherboard.
Identifies and labels all connectors on the motherboard.
Shows jumper locations and explains their functions for configuration.
Details internal and external connector pin assignments and functions.
Instructions for installing and configuring the CPU and memory modules.
Procedure for clearing or resetting CMOS settings via the JRTC jumper.
Configuration of the UltraDMA33 IDE interface and jumper settings.
Details the Serial ATA II interfaces and their transfer rates.
Describes the slim type floppy port and connection instructions.
Information about the Intel PCI Express Gigabit Ethernet controller.
Features of the Intel GM(E)965 chipset graphics and display outputs.
Details LVDS connector, backlight inverter, and panel voltage settings.
Steps and components needed for LCD panel setup.
Selecting LCD panel type within the BIOS settings.
Information on the HDTV interface for TV system output.
Details the Realtek ALC888 codec for High Definition Audio.
Describes the programmable 8-bit digital I/O interface.
Information on DC 12V input and ATX 20-pin power connectors.
Details the JFRNT header for front panel controls and indicators.
Steps to install and configure the Realtek HD Audio driver and sound system.
Configuring video memory settings in BIOS using DVMT technology.
Adjusting display settings like resolution and color via OS properties.
Overview of the Award BIOS utility and how to enter setup.
Pin assignment details for the 44-pin IDE connector.
Pin assignment details for the 7-pin Serial ATA connector.
Pin assignment details for the 26-pin floppy connector.
Pin assignment details for the 5-pin IrDA header.
Pin assignment details for the 9-pin COM1 connector.
Pin assignment details for the 9-pin COM2 connector.
Pin assignment details for the 26-pin LPT connector.
Pin assignment details for the 15-pin CRT connector.
Pin assignment details for the RJ45 LAN connector.
Pin assignment details for the 10-pin USB header.
Information on downloading and using the Award BIOS auto flash tool.
Step-by-step guide for updating the BIOS using the flash tool.
Lists I/O port addresses used by various system components.
Lists memory address ranges for system components.
Details system IRQ and DMA channel assignments.
Example commands for programming General Purpose I/O ports.
Setup and programming of the system watchdog timer for auto-reset.
Jumper configurations for RS-422, RS-485, and IrDA functions.
To Next Page