Appendix 2: Specifications
184
Specifications Model vb2000 Remarks
Balancing
Planes
Speed range
Measurement type
Min and Max values
Weight modes
Remove trial weights
Filter bandwidths
Manual data entry
Storage
1, 2
30 RPM to 60 000 RPM
Acceleration, velocity, displacement
(0.0004 to 4) in/s = (0.01 to 100) mm/s
Angle 0° to 360°, fixed position, circumference arc
Yes, No
15 CPM, 150 CPM
Yes
10 balance jobs total
∅-peak. Typical, dependent on calibration
e.g. attach weights on fan blades, linear distance around
circumference
Allows re-entry of previous balance jobs
Revised 22 November 2005. While every effort has been made to provide the most accurate information we advise that information in this
document may contain technical inaccuracies or typographical errors. Commtest Instruments Ltd may at any time and without notice make
improvements and/or changes in the products described in this information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...