Section 3: Onsite Analysis - Measurement Menu
35
• Press to display the Set Demodulation Bandwidth Menu
and use
or to select a value.
• Press to return to the quick setup menu and set the
Fmax. This can be done in two ways:
¾ Press
to display the Machine Running Speed Menu
then use the number keys to enter an RPM value. The
Fmax will be set to 40 x the RPM (or rounded up to the
closest value).
OR
• Press
to display the Set Fmax Menu and use or
to select a value.
• Once the Fmax is set press
to return to the quick setup
menu then press
to take the measurement.
When a measurement has been taken it can be analyzed
immediately on the instrument (see Analyzing Measurements on
page
55) or stored for later analysis (see Storing Measurements on
page
54).
Setting your own parameters
Option
Custom Setup allows you to customize this menu to use
your own settings instead of the factory defaults. See Custom Setups
(page
57) for more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
