ComNav SinoGNSS T300 PLUS - Start Rover Station by Survey Master

SinoGNSS
○
R
T300 PLUS User Guide
33
When start Base succeed, it will show as below in Survey Master.
5.5.2 Start Rover Station by Survey Master
⚫ Connect Survey Master with T300 PLUS receiver via Bluetooth based on Chapter 5.4.
⚫ Set same protocol and frequency with Base receiver.
⚫ The current status on the bottom will change from Single to Fixed.
⚫ Library choose: Choose a known point
from Element;
⚫ Receive: Receive a point from GNSS;