Need help?Do you have a question about the ComNav T300+CGSurvey and is the answer not in the manual?
Advises reading publication and safety requirements before use, including regulations and care.
Details performance, positioning, communications, data format, physical, environmental, electrical, and software specs.
Discusses battery life for rover and base station operations.
Covers safety precautions, charging, storing, and proper disposal of batteries.
Explains the function and status indication of buttons and LEDs on the receiver.
Details methods for powering the T300 receiver, including internal and external options.
Covers configuration, default settings, and data handling for static surveys.
Explains RTK operation using internal transmitting and receiving radio.
Guides on initiating the base station setup within CGSurvey software.
Details the process of setting up the rover station in CGSurvey.
Guides on setting up the rover for PDA CORS mode in CGSurvey.
Describes converting WGS84 to local coordinates using control points.
Explains how to check H.Resid and V.Resid values for calibration accuracy.
Explains how to reset the grid for shifting RTK coordinates between base stations.
To Next Page
General
