ComNav T300+CGSurvey - Reset Grid Function

ComNav T300 + CGSurvey User Guide
42
6.2.2 Reset Grid Function
Reset Grid option is also a unique function of CGSurvey. After doing site calibration,
the relationship between WGS84 and local gird coordinate is fixed, later you start
your work in different area on the same project, the base station will be moved to
different places, so you need 1 point to shift your RTK coordinates between different
base stations.
One way is that you can start base station on known points, use this known value to
shift your coordinates to match with the real value.
But we suggest use “Reset Gird”, put the base station anywhere you want, survey
known point by Rover and used for Reset grid, this will improve your work efficiency;