ComNav T300+CGSurvey - Staking out Points

ComNav T300 + CGSurvey User Guide
45
The same as Measure Points function but continuously. It offers 4 different ways to
measure point: Fix Time, Fix Distance, Time and Distance and Time or Distance.
Tip: if you use 5Hz interval (see chapter 5.2.3), you will find it is refreshing rapidly. This
function can also be used in stake out and can improve your efficiency.
7.3 Staking out Points
 Uploading the stake out points to the current job, and do site calibrations.
 Tap Survey->Stake Points-> Add to add the stake out points to the points list.
Then select the point name you want to stake and tap Stake.