1 Introduction
The SinoGNSS
○
R
T300 PLUS GNSS Receiver User Guide is aimed to help you get familiar
with the T300 PLUS receiver and start your project effectively. We highly recommend you
to read this manual before surveying, even you have used other Global Positioning
System (GPS) receivers before.
1.1 About the receiver
With SinoGNSS® Quantum™ algorithm, T300 PLUS GNSS receiver can be applied in RTK
mode with all GNSS constellations. T300 PLUS receiver has ultra-small size and strong
anti-interference ability to make it possible to work even in harsh environments. It is the
ideal RTK/GNSS product for surveyors.
1.2 Receiver features
The SinoGNSS® T300 PLUS GNSS Receiver key features:
• Ultra small and super light
- Size (W × H): 15.8cm × 7.5cm
- Weight: 0.95kg (including 2 batteries)
• 1198 channels of simultaneously tracked satellite signals
• Increased measurement traceability with SinoGNSS® Quantum™
algorithm technology
• Hot swap battery design
• Cable-free Bluetooth wireless technology
• 5 indicator LEDs for battery, diff, satellite, WIFI/GPRS and 2 function buttons
for power and static
• IP67 waterproof
• Full base/rover interoperability
• Integrated receiving & transmitting radio with 12.5KHz frequency interval
• Integrated IMU sensor
• Integrated WiFi module
• Long distance range radio module
• Integrated 4G module, support Ntrip and Point to Point/Points protocols
• Support long baseline E-RTK™ (Beidou B3 signal is included in RTK
calculate engine)
1.3 T300 PLUS Receiver parts list
This section provides overall T300 PLUS receiver parts list, including basic supplies and
customized kits based on your requirements.
To Next Page
Loading...
