Comnet CWGE2FE8MSPOE - Page 116

109
 Context Match Rule: Select the context match rule.
 Read View Name: Set up the read view.
 Write View Name: Set up the write view.
 Notify View Name: Set up the notify view.
 Click to add context name.
 Click to remove unwanted context name.
MIBview Table
Configure MIB view table.
 ViewName: Set up the name.
 Sub-Oid Tree: Fill the Sub OID.
 Type: Select the type – exclude or included.
 Click
to add context name.
 Click
to remove unwanted context name.