Comnet CWGE2FE8MSPOE - TFTP Commands Set; Poe Commands Set

44
TFTP Commands Set
Netstar Commands
Level
Description
Defaults Example
backup
flash:backup_cfg
G
Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#backup
flash:backup_cfg
restore flash:restore_cfg
G
Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G
Upgrade firmware by
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#upgrade
flash:upgrade_fw
PoE Commands Set
Netstar Commands
Level
Description
Example
poe
P
Enter POE configure
mode
switch#poe
system
knockoff-disabled
[Enable|Disable]
P
Set PoE system Port
Knockoff Disabled
switch(poe)# system
knockoff-disabled disable
system ac-disconnect
[Enable|Disable]
P
Set PoE system AC
Disconnect
switch(poe)# system
ac-disconnect disable