Comnet CWGE2FE8MSPOE - Page 50

43
8021x misc maxrequest
[number]
G
Use the 802.1x misc
max request global
configuration
command to set the
MAX requests.
switch(config)# 8021x misc
maxrequest 3
8021x misc
reauthperiod [sec.]
G
Use the 802.1x misc
reauth period global
configuration
command to set the
reauth period.
switch(config)# 8021x misc
reauthperiod 3000
8021x portstate
[disable | reject | accept |
authorize]
I
Use the 802.1x port
state interface
configuration
command to set the
state of the selected
port.
switch(config)#interface
fastethernet 3
switch(config-if)#8021x portstate
accept
show 8021x
E
Displays a summary of
the 802.1x properties
and also the port
sates.
switch>show 8021x
no 8021x
G
Disable 802.1x
function
switch(config)#no 8021x