Comnet CWGE2FE8MSPOE - System Information

53
System Information
User can assign the system name, description, location and contact personnel to identify
the switch. The version table below is a read-only field to show the basic information of the
switch.
 System Name: Assign the system name of the switch (The maximum length is 80
bytes)
 System Description: Describes the switch (The maximum length is 80 bytes).
 System Location: Assign the switch physical location (The maximum length is 80
bytes).
 System Contact: Enter the name of contact person or organization (The maximum
length is 80 bytes).
 Firmware Version: Displays the switch’s firmware version
 Kernel Version: Displays the kernel software version
 MAC Address: Displays the unique hardware address assigned by manufacturer
(default)
 And then, click .
System Information interface