Comnet CWGE2FE8MSPOE - SNMP Commands Set

37
SNMP Commands Set
Netstar Commands
Level
Description
Example
snmp system-name
[System Name]
G
Set SNMP agent
system name
switch(config)#snmp
system-name l2switch
snmp system-location
[System Location]
G
Set SNMP agent
system location
switch(config)#snmp
system-location lab
snmp system-contact
[System Contact]
G
Set SNMP agent
system contact
switch(config)#snmp
system-contact where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G
Select the agent mode
of SNMP
switch(config)#snmp agent-mode
v1v2cv3
snmp
community-strings
[Community]
right
[RO/RW]
G
Add SNMP community
string.
switch(config)#snmp
community-strings public right
rw
snmp-server host
[IP address]
community
[Community-string]
trap-version
[v1|v2c]
G
Configure SNMP
server host information
and community string
switch(config)#snmp-server host
192.168.1.50 community public
trap-version v1
(remove)
Switch(config)#
no snmp-server host
192.168.1.50
snmpv3 context-name
[Context Name ]
G
Configure the context
name
switch(config)#snmpv3
context-name Test