Comnet CWGE2FE8MSPOE - 802.1 X Commands Set

41
802.1x Commands Set
Netstar Commands
Level
Description
Example
8021x enable
G
Use the 802.1x global
configuration
command to enable
802.1x protocols.
switch(config)# 8021x enable
8021x system radiusip
[IP address]
G
Use the 802.1x system
radius IP global
configuration
command to change
the radius server IP.
switch(config)# 8021x system
radiusip 192.168.1.1
8021x system serverport
[port ID]
G
Use the 802.1x system
server port global
configuration
command to change
the radius server port
switch(config)# 8021x system
serverport 1812
8021x system
accountport
[port ID]
G
Use the 802.1x system
account port global
configuration
command to change
the accounting port
switch(config)# 8021x system
accountport 1813
8021x system sharedkey
[ID]
G
Use the 802.1x system
share key global
configuration
command to change
the shared key value.
switch(config)# 8021x system
sharedkey 123456