Comnet CWGE2FE8MSPOE - Page 49

42
8021x system nasid
[words]
G
Use the 802.1x system
nasid global
configuration
command to change
the NAS ID
switch(config)# 8021x system
nasid test1
8021x misc quietperiod
[sec.]
G
Use the 802.1x misc
quiet period global
configuration
command to specify
the quiet period value
of the switch.
switch(config)# 8021x misc
quietperiod 10
8021x misc txperiod
[sec.]
G
Use the 802.1x misc
TX period global
configuration
command to set the
TX period.
switch(config)# 8021x misc
txperiod 5
8021x misc supptimeout
[sec.]
G
Use the 802.1x misc
supp timeout global
configuration
command to set the
supplicant timeout.
switch(config)# 8021x misc
supptimeout 20
8021x misc
servertimeout [sec.]
G
Use the 802.1x misc
server timeout global
configuration
command to set the
server timeout.
switch(config)#8021x misc
servertimeout 20