56
DHCP Server Configuration
The system provides the DHCP server function. By enabling the DHCP server function,
the switch system will be a DHCP server.
DHCP Server: Enable or Disable the DHCP Server function. Enable:—the switch will
be the DHCP server on your local network
Low IP Address: The dynamic IP range. Low IP address is the beginning of the
dynamic IP range. For example: dynamic IP range is from 192.168.1.100 ~
192.168.1.200. In contrast, 192.168.1.100 is the Low IP address
High IP Address: The dynamic IP range. High IP address is the end of the dynamic
IP range. For example: dynamic IP range is from 192.168.1.100 ~ 192.168.1.200. In
comparison, 192.168.1.200 is the High IP address
Subnet Mask: The dynamic IP assign range subnet mask
Gateway: The gateway in your network
DNS: The IP Address of the Domain Name Server in your network
Lease Time (sec): It is the time period that system will reset the dynamic IP
assignment to ensure the dynamic IP will not been occupied for a long time or the
server doesn’t know that the dynamic IP is idle
DHCP Server Configuration interface
To Next Page
Loading...
