Comnet CWGE2FE8MSPOE - Page 26

19
Configura
tion
configure
command
while in
privileged
EXEC mode.
(config)#
privileged
EXEC
mode,
enter exit
or end
parameters that apply to
your switch as a whole.
VLAN
database
Enter the vlan
database
command
while in
privileged
EXEC mode.
switch
(vlan)#
To exit to
user EXEC
mode,
enter exit.
Use this mode to configure
VLAN-specific parameters.
Interface
configurat
ion
Enter the
interface
command
(with a specific
interface)
while in global
configuration
mode
switch
(config-if
)#
To exit to
global
configuratio
n mode,
enter exit.
To exist to
privileged
EXEC
mode, or
end.
Use this mode to configure
parameters for the switch
and Ethernet ports.
PoE
Enter the PoE
command
while in
privileged
EXEC mode.
switch(P
oE)#
To exit to
privileged
EXEC
mode,
enter exit
Use this mode to PoE
parameters for the switch.