2-8 Troubleshooting
Categories by type:
■ System features—security, power, boot management
■ Communication—port, modem, and other communication devices
■ Storage—storage-related devices such as hard drive, CD-ROM drive, DVD-ROM
drive, diskette drive
■ Input devices—keyboard, mouse, and other input devices
■ Network—network adapter or other network-related devices
■ Audio—sound properties and audio device settings
■ Video—display timeouts and video device resources
■ Other—miscellaneous devices
Categories by connection:
■ System features—security, power, boot management
■ System devices—keyboard, mouse, parallel and serial ports
■ ISA—ISA bus and connected devices
■ PCI—PCI bus and connected devices
■ PC Card—PC Card devices
Running Computer Setup
1. Turn on or restart the computer by clicking Start ⇒ Shut Down ⇒ Restart the
computer.
2. Press F10 when the blinking cursor appears in the upper-right corner of the screen.
NOTE: If your a setup password is enabled, it must be used to access Computer
Setup.
3. Click a language and press Enter.
4. Click Computer Setup and press Enter.
5. When you are finished, click Exit.
Exiting Computer Setup
1. Click Exit.
2. Select one of the following Exit options:
■ Save—Saves the new settings and exits Computer Setup.
NOTE: Some settings may not take effect until the computer is restarted.
■ Ignore—Exits Computer Setup and restores previous settings.
■ Cancel—Returns to Computer Setup.
To Next Page
Loading...
