5-2 Computer Removal and Replacement Procedures
5.2 Disassembly Sequence Chart
This chart shows the order in which disassembly procedures are performed:
5.3 Preparing the Computer for Disassembly
5.3.1 Disconnecting the AC Power
5.3.2 Undocking the Computer
5.3.3 Battery Pack
5.3.4 DualBay Devices
5.3.5 PCMCIA
5.4 Modem
5.5 CD-ROM or DVD-ROM Drive
5.6 Keyboard
5.7 Memory Expansion Board
5.8 Hard Drive
5.9 Lithium Real-Time Clock Battery
5.10 Microphone/Display Cable Cover and Microphone
5.11 Clutch Covers/Display Assembly
5.11.1 Clutch Covers
5.11.2 Display Assembly
5.12 Top Cover Assembly
5.13 LED Status Panel
5.14 Audio Board and Audio Cable
5.15 DC-DC Converter
5.16 Fan
5.17 I/O Fixture Connector
5.18 System Board
5.19 External Computer Components
5.19.1 Computer Logo
5.19.2 Computer Feet
5.3 Preparing the Computer for Disassembly
Before beginning the removal and replacement procedures:
1. Disconnect the AC power and any external devices (Section 5.3.1).
2. Remove the battery pack (Section 5.3.3).
3. Remove the DualBay device (Section 5.3.4).
4. Remove any PCMCIA cards (Section 5.3.5).
To Next Page
Loading...
