5-6 Computer Removal and Replacement Procedures
5.3.4 DualBay Devices
CAUTION: The device in the DualBay must be removed prior to performing
maintenance on the computer.
!
WARNING: Metal objects can damage the battery pack as well as the battery contacts
in the battery compartment. To prevent damage, do not allow metal objects to touch the
battery contacts. Place only the battery pack for the Armada 1500c Series into the
battery compartment. Do not force the battery pack if insertion does not occur easily.
!
WARNING: Do not crush, puncture, or incinerate the battery pack. Do not dispose of in
water. Do not expose to temperatures higher than 60°C. Do not open a battery pack,
because this damages the pack, makes it unserviceable, and exposes potentially
harmful battery components. There are no field-serviceable parts located inside the
battery pack.
NOTE: If a battery pack is used in the DualBay, use the battery release latch to release
the battery.
Either a diskette drive or a modular battery pack may be installed into the DualBay.
The device in the DualBay must be removed prior to performing maintenance on the
computer. For convenience, a diskette drive is depicted in this sequence. To remove the
DualBay device:
1. Turn the computer bottom side up.
2. Pull the diskette drive release latch 1 toward the front of the computer.
3. Remove the diskette drive 2.
Figure 5-4. Removing the DualBay Device
To Next Page
Loading...
