5-4 Computer Removal and Replacement Procedures
5.3.3 Battery Pack
The battery pack should be removed before performing any internal maintenance on the
computer.
!
WARNING: Metal objects can damage the battery pack as well as the battery
contacts in the battery compartment. To prevent damage, do not allow metal
objects to touch the battery contacts. Place only the battery pack for the
rmada 1500c Series Personal Computer into the battery compartment. Do not
force the battery pack into the handle if insertion does not occur easily.
!
WARNING: Do not crush, puncture, or incinerate the battery pack. Do not
dispose of in water. Do not expose to temperatures higher than 60°C. Do not
open a battery pack, because this damages the pack, makes it unserviceable,
and exposes potentially harmful battery components. There are no field-
serviceable parts located inside the battery pack.
To remove the battery pack from the computer:
1. Turn the computer bottom side up.
2. Slide the battery release latch 1.
3. Remove the battery pack 2.
Figure 5-2. Removing the Battery Pack
To Next Page
Loading...
