5-32 Computer Removal and Replacement Procedures
5.15 DC-DC Converter
To remove the DC-DC converter:
1. Disconnect the AC power and any external devices (Section 5.3.1).
2. Remove the battery pack (Section 5.3.3).
3. Remove the DualBay device (Section 5.3.4).
4. Remove any PCMCIA cards (Section 5.3.5).
5. Remove the keyboard (Section 5.6).
6. Remove the microphone/display cable cover and microphone (Section 5.10).
7. Remove the clutch covers/display assembly (Section 5.11.1).
8. Remove the top cover assembly (Section 5.12).
9. Remove the screw that secures the DC-DC converter to the base enclosure.
Figure 5-31. Removing the DC-DC Converter Screw
To Next Page
Loading...
