A Look at the Computer
Hardware Guide 2–17
Additional standard components and their functions
1
Power cord Connects the AC Adapter to an
AC electrical outlet.
2
Modem cable (internal
modem models only)
Connects the modem to an RJ-11
telephone jack or to a country-specific
modem adapter.
✎
The modem cable has a
6-pin
RJ-11 connector at
each end.
3
Country-specific modem
adapter (included with
internal modem models by
region as required)
Adapts the modem cable to a
non-RJ-11 telephone jack.
4
Network cable (network
models only)
Connects the computer to an
Ethernet network jack.
✎
The network cable has an
8-pin
RJ-45 connector at
each end.
5
AC Adapter Converts AC power to DC power.
6
Weight saver Can replace an optional MultiBay
device to protect the MultiBay and
reduce computer weight.
7
Japan-specific outlet
adapter (Japan only)
Connects the AC Adapter to a
2-prong electrical outlet.
8
QuickRestore kit Contains the software preinstalled on
the computer.
(Continued on next page)
229045-002.book Page 17 Friday, September 21, 2001 11:16 AM