5–12 Hardware Guide
Removable Drives
Inserting and Removing Drive Media
Inserting a CD, CD-RW or DVD
1. Turn on the computer.
2. Press the media release button
1
on the drive bezel to release
the media tray, then pull the tray outward until it is fully
extended
2
.
3. Press the disc onto the tray spindle
3
. Handle the disc by the
edges, not the flat surfaces. (If the media tray is not fully
extended, tilt the disc to position it over the tray spindle, then
press it downward into position.)
4. Close the media tray.
Inserting a disc into a CD or DVD drive
229045-002.book Page 12 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
Need help?
General