7–6 Hardware Guide
External Device Connections
Using a USB Device
USB devices function in the system the same as comparable
non-USB devices, with 1 exception:
By default, USB devices do not function unless an operating
system that supports USB is loaded.
To use a USB keyboard, mouse, or hub connected to a USB
connector on the computer during startup or in a non-Windows
application or utility, enable USB legacy support.
Enabling USB Legacy Support
1. Turn on or restart the computer, then press
F10
while the
F10 = ROM Based Setup message is displayed in the lower
left corner of the screen.
❏
To change the language, press
F2.
❏
For navigation instructions, press
F1.
2. Select the Advanced menu > Device Options.
3. Select Enable USB legacy support.
4. To save your preference and exit Computer Setup, select
File > Save Changes and Exit, then follow the instructions on
the screen.
229045-002.book Page 6 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
