Hardware Guide 1–1
1
Hardware and Software Setup
Setting Up the Hardware
Ä
CAUTION:
Setup must begin with connecting the computer to AC power.
To prevent file corruption, possible damage to components, and ensure
that the correct drivers load during initial setup:
■
Do not set up the computer while it is docked in an optional
docking base.
■
Do not remove the battery pack until the computer has been
connected to external AC power.
■
Run the computer on external AC power, not on battery power,
throughout initial setup.
229045-002.book Page 1 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
