6–6 Hardware Guide
Audio and Video
To change the color television standard mode from NTSC:
1. Turn on or restart the computer. Press
F10
while the
F10 = ROM Based Setup message is displayed in the lower
left corner of the screen.
❏
To change the language, press
F2.
❏
For navigation instructions, press
F1.
2. Select Advanced > Device Options, then press
enter.
3. Enter your preference, then press
F10.
4. To save your preference and exit Computer Setup, select
File > Save Changes and Exit, then follow the instructions on
the screen.
229045-002.book Page 6 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
Need help?
General