Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Product Description Troubleshooting Illustrated Parts Catalog
Home Removal & Replacement Jumper & Switch Information Specifications
Clearing CMOS
Power-On Self
Test (POST)
Configuration
Diagnostic error
codes
Troubleshooting
without
diagnostics
TROUBLESHOOTING
Configuration
This section explains how to use Setup and Compaq Utilities which should be accessed in the
following instances:
When a system configuration error is detected during the Power-On Self-Test
(POST)
■
To change factory default settings for some of the computer features■
To change the system configuration, which is sometimes necessary when you
add or remove optional hardware
■
To set system configuration features■
Click a link below to go to the appropriate subsection.
Preparing the Computer
Setup
Accessing Compaq Utilities Options
View System Information (INSPECT)
Preparing the Computer
To Next Page
Loading...
