Compaq Presario Series - Removing the I;O Board

United States
COMPAQ
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Product Description Troubleshooting Illustrated Parts Catalog
Home Removal & Replacement Jumper & Switch Information Specifications
DISASSEMBLY
SEQUENCE
Electrostatic
Discharge
Service
Considerations
Preparation
for
Disassembly
Serial Number
Left Easy
Access Panel
Right Easy
Access Panel
Memory
Module
Top Access
Panel
REMOVAL & REPLACEMENT
Removing the I/O Board
Removal
1
Perform preparation
procedures.
2
Remove the Left Easy Access
panel.
3
Remove the top access cover.
4
Remove the front door.
5
Remove the plastic subpanel.
6
Disconnect the 1394 and USB
cable on the I/O Bracket from the
connectors on the system board.
Next Step