Compaq Prolinea Family - Page 169

Chapter 7. Compaq Utilities
Chapter 7.0 Introduction
This chapter contains description of some Compaq utilities that can be
helpful when servicing the Compaq ProLinea Family of Personal Computers.
These utilities include:
o Energy Saver utility
o Graphics resolution
o QuickLock/QuickBlank
o Additional Security Management Features
o Flash ROM
Chapter 7.1 Energy Saver Utility
Energy Saver is a combination of hardware and software components that
allows you to conserve power when your computer is turned on but not in
use. The computer can be set to go into the Energy Saver mode after a
specified period of inactivity and return to full power mode when user
activity at the keyboard or mouse is detected. Energy Saver is available
under the Windows environment, and some features are available under the
MS-DOS environment. To take full advantage of the Energy Saver features,
you must be using an Energy Saver monitor.
NOTE: The Energy Saver components are features of the computer; however,
for full Energy Saver benefits, the computer must be connected to a
monitor that has power conservation features.
Energy Saver Features
The Energy Saver features are described in Table 7-1.
Table 7-1. Energy Saver Features
===========================================================================
Feature Purpose How It Is Established
===========================================================================
Energy Saver Mode Allows PC to go to a Energy Saver (Default=OFF)
reduced power state.
---------------------------------------------------------------------------
Energy Saver Allows user to select Energy Saver: Monitor
Timeouts timeout values for system Default=15 min.;
unit and/or energy saver System unit Default=30
monitor. Monitor and min.
system timeouts may be
set independently
of each other.
---------------------------------------------------------------------------