To enable the keyboard and input device connected to the mouse connector,
enter the password.
NOTE: For security reasons, the characters the user types do not appear on
the screen. The application will not be affected by the characters
typed.
Chapter 7.4 Additional Security Management Features
The additional security features provided in the advanced section of
Security Management are presented in Table 7-3. These features must be
used in combination with a power-on password. To enable one of these
features:
1. Select and open Security Management, found in the Compaq Control
Center.
2. Click on the Power-on Password box.
3. From the Power-on Password box, click on the Advanced box.
4. From the Advanced Security Management box, select any of the features
listed above.
5. Select the OK button.
6. When you restart the computer, the feature you selected will be
disabled.
To disable the feature, deselect the option and restart the computer.
NOTE: Table 7-3 describes how the utilities and configuration switches
function together. In most cases the user will not need to set any
switches. For more information about these switches, refer to
Chapter 6, "Jumper and Switch Settings."
Table 7-3. Advanced Security Features
===========================================================================
Feature Purpose How It Is Established
===========================================================================
SETUP Password Allows configuration to Computer Setup utility
be changed.
---------------------------------------------------------------------------
Power-On Password Prevents use of the Security Management
computer unless password (from both Windows and
is entered Configuration and
Diagnostics menu)
---------------------------------------------------------------------------
QuickLock/QuickBlank Disables keyboard and Security Management
can blank the screen (from both Windows and
without exiting Configuration and
application; enabled Diagnostics menu)
with a password
To Next Page
Loading...
