turnpoint sequence in the active task.
Restart task: the task navigation starts over from the first turnpoint;
Next waypoint, previous waypoint: manually select the next waypoint in the task or the
previous.
The central column controls the volume of C-Pilot EVO. You can increase or decrease the volume or
enable/disable completely the variometer audio.
On the right you will find:
The touch-panel lock button. This will return to the navigation page and lock the touch panel
to avoid involuntarily changing some settings before take off. When activated, it will
deactivate automatically when C-Pilot PRO detects the take off.
The SOS button sends an emergency message by means of a DSX Safly device, if
connected.
normal/powersave button: if powersave is active, the backlight will switch off when there is
no input from the touch panel for 30 s. Just touch the touch panel to reactivate the backlight
for 30 s more.
The back button brings you back to the navigation page.
The command page, as well as the other menu pages, is automatically closed if not used for eight
seconds.
To Next Page
Loading...