Software updates
C-Pilot EVO features a powerful processor that will allow adding new functions. Updating the device
is a very simple procedure.
Download the update file from the Compass website (www.compass-italy.com) and copy it in the
“updates” folder of the USB memory, after connecting C-Pilot EVO to your PC via USB cable (see
the detailed procedure in the connection chapter, page 18).
Disable the USB connection and return to the navigation page. C-Pilot PRO will ask you if you want
to install the update (Figure 44). If you answer “no”, C-Pilot PRO will prompt you to delete the
update file; otherwise the installation procedure will start. Normally, the update will not take more
than one minute.
Warning: please take care that the battery is fully charged or connect a charger
before starting the update procedure. If the battery drains during the installation, C-
Pilot EVO may stop working.
When the installation procedure ends, C-Pilot EVO will confirm that the update was successfully
completed. Press “ok” to switch the device off. When you power it on again the new update will be
active.
Figure 44: an update was found. Do you want to install it?
To Next Page
Loading...