the turnpoints is drawn in red. The advantage, in terms of distance to fly, is quite clear.
Figure 22: route optimisation
CONICAL END SPEED SESSION
It is possible to set the goal as Conical End Speed Session (CESS).
Setting the Cone is very intuitive.
a) select the waypoint as END OF
SPEED;
b) select as CONICAL ES;
c) manage the inclination of cone
simply by pressing the button on the
right side (in this example “4”);
d) set the cone radius at ground just
by selecting the option (a window
will appear to enter the radius the
task director has decided)
To Next Page
Loading...