In some cases it is possible to find the number in the right showing less distance (in Km) than the
one in the left. This is not an error but a good suggestion. In fact the XC-Assistant has calculated
that the best triangle possible considering the flight already done is more little than the distance
covered. As consequence the pilot will obtain more points in closing a FLAT triangle rather than a
FAI triangle
Example: 100/52 = you can close a triangle of max 52 km … but you have already flown 100 km. As
consequence is more useful to continue the flight or to go back
and close a flat triangle.
CYLINDER DIST: this fileld (normally used in competition to
show the distance to the WP cylinder) if the XC-Assistant is
activated with AUTOGOTO will show the distance to the next
sector of the triangle
ALT AT NEXT: this fileld if the XC-Assistant is activated with
AUTOGOTO will show the altitude the pilot will arrive to the
next sector of the triangle
ALT ABOVE NEXT: this fileld if the XC-Assistant is
activated with AUTOGOTO will show the altitude the pilot
will arrive above the next sector of the triangle considering
the terrain
G/R TO NEXT: this fileld if the XC-Assistant is activated with
AUTOGOTO will show the altitude the pilot will arrive to the
next sector of the triangle
To Next Page
Loading...