Advanced management of airspaces
Long cross-country flights in regions where free-flight-prohibited airspaces are present requires
particular attention for obvious safety reasons.
C-Pilot EVO is designed to give you the maximum situation awareness, thanks to the possibility to
visualize on the map the airspaces and to activate audible alarms, based on proximity and arrival
time. If you set it up correctly before flying, C-Pilot EVO will manage automatically all the details,
allowing you to concentrate on your piloting.
You can access the main page that allows configuring airspace management by means of the
“airspaces” button in the main menu:
The page, shown in Figure 28, provides a list of the airspaces in use and gives access to further
pages to setup the proximity alarms, to choose the drawing options, and to create or edit new
airspaces.
Figure 28: airspace management page.
The list reports the class, base and top altitude, and the name of the airspaces. It can be filtered by
name when you need to search a specific airspace by means of the buttons below the list. For
example, the filter “AB0”, “EF2” will select all the airspaces whose name contains the characters “A”,
“B” or “0” (zero), followed by “E”, “F” or “2”.
To Next Page
Loading...