Computherm E400RF - Connecting the Thermostat to the Application; Controlling a Thermostat by Multiple Users

- 20 -
8.3. Connecting the thermostat to the application
• You can search for COMPUTHERM E400RF thermostats connected to the
Wi-Fi network concerned by tapping the “Search” icon in the left bottom
corner (i.e. this requires that the thermostat is connected to the same Wi-Fi
network used for the phone).
• On the appearing page “Search List” you can choose the thermostat
you wish to assign to the installed application. Touching the name of the
thermostat concerned, it is assig ned to the application and from now on
the thermostat can be controlled from anywhere. Following this, on the start
screen of the application all assigned thermostats appear, together with
currently measured (PV) and set (SV) tempe ratures.
8.4. Controlling a thermostat by multiple users
When several users wish to control the same thermostat, after the thermostat
has been put into operation the following steps should be carried out to add
further users:
• Connect your smartphone/tablet to the Wi-Fi network to which the
COMPUTHERM E400RF thermostat has been connected.
• On the apparatus you want to use for controlling download then start app-
lication COMPUTHERM E Series.
• Tapping the “Search” icon in the left bottom corner, the phone/table will
search COMPUTHERM E Series thermostats connected to the Wi-Fi net-