- 29 -
11.6. Restoring default setting (FAC)
All settings of the thermostat, except for date and time, will be restored to fa-
ctory setting. To restore factory setting, after selecting FAC setting option and
tapping the button several times, switch over the appearing 08 setting to
00. Then tap the button once to restore factory setting.
If you move on by tapping the button and leaving the FAC value at its de-
fault value (08) then the device will not return to default setting but save the
settings and exits the operation-related settings menu.
12. SWITCHING BETWEEN ON AND OFF POSITIONS AND
MODES OF THE DEVICE
The thermostat has the following 2 positions:
• O position
• On position
You can switch between o and on positions in the following way:
• Using phone application: by tapping the icon
• On the thermostat: tapping the button
When the thermostat is o, the screen of the devices turns o and in the app-
lication POWER-OFF lettering replaces measured and set temperatures, and
the relay outputs of the device go into o (open) position. When the thermostat
To Next Page
Loading...
