Computherm E400RF - Programmed Auto Mode; Description of the Programmed Mode

- 31 -
the output of the thermostat will switch on. If the room temperature is higher
than that set on the thermostat, the output of the thermostat will switch off.
The temperature to be maintained by the thermostat can be specified in
0.5 °C steps (the minimum and maximum values of the adjustable range are
5 °C and 99 °C, respectively).
The currently set temperature can be modied in the following way:
• Using phone application:
 with the icons
 moving the slide (groove) on the circular scale
• On the thermostat: with the buttons
12.2. Programmed auto mode
12.2.1. Description of the programmed mode
Programming means setting of switching times and selection of corresponding
temperature values. Any temperature set for a switch will remain in e󰀨ect until
the time of the next switch. Switching times can be specied with an accuracy
of 1 minute. Within the temperature range (the minimum and maximum values
of the adjustable range are 5 °C and 99 °C, respectively) specied in the set-
tings a di󰀨erent temperature can be chosen for each switching time, in 0.5 °C
increments.
The device can be programmed for a period of one week. In the programmed
auto mode the thermostat operates automatically, and cyclically repeats the
entered switches every 7 days. The following 3 options are available to prog-