Computherm E400RF - Description of the Steps of Programming

- 32 -
ram the thermostat:
• 5+2 mode: setting 6 switches per day for 5 working days and 2 swit-
ches per day for 2 days of the weekend
• 6+1 mode: setting 6 switches per day from Monday till Saturday and 2
switches on Sunday
• 7+0 mode: setting 6 switches per day for every day of the week
If you do not need all adjustable switches on certain days (e.g. only 4 switches
is required on working days), you can eliminate unnecessary switches by setting
their time and temperature to the time and temperature of the last switch you
want to use.
12.2.2. Description of the steps of programming
• Using phone application:
a) To enter programming mode touch the icon. Then the screen for
programming appears on the display.
b) The indication of the currently selected programming mode is located at
the top of the screen for programming, beside the legend Programing
mode. Touching this, you can switch between programming modes as fol-
lows:
- 12345,67: 5+2 mode
- 123456,7: 6+1 mode
- 1234567: 7+0 mode