- 33 -
c) Switches belonging to a given programming mode are below the indication
of the programming mode. You can modify data (time, temperature) of
switches by tapping the value concerned.
d) To complete programming and return to the screen belonging to the ther-
mostat touch the < icon in the upper left corner.
Programs that were set earlier can be checked at any time by entering the
programming mode again.
• On the thermostat:
a) To enter programming mode touch the button for approximately 5 se-
conds. Then on the display the legend LOOP appears in place of the hour,
and the indication belonging to the currently selected programming mode
replaces the current day.
b) With the buttons choose the preferred programming mode as follows:
- for 5+2 mode: 12345
- for 6+1 mode: 123456
- for 7+0 mode: 1234567
Now touch the button again.
c) Following this, you can specify or modify various switch times and temperatu-
res as follows:
- You can switch between switch times with the button.
- With the help of you can switch between data belonging to switch
To Next Page
Loading...
