- 3 -
10.2. Disabling further connections of the thermostat assigned to the application 22
10.3. Deleting the thermostat assigned to the application 23
10.4. Setting the day and time 23
10.5. Locking operating buttons 24
11. Operation-related settings 25
11.1. Selecting the switching sensitivity (DIF) 27
11.2. Calibration of the temperature sensor (ADJ) 27
11.3. Antifreezing (FRE) 28
11.4. Memorizing ON/OFF status in case of a power failture (PON) 28
11.5. Changing between heating or cooling mode (FUN) 28
11.6. Restoring default setting (FAC) 29
12. Switching between ON and OFF positions and modes of the device 29
12.1. Manual mode 30
12.2. Programmed auto mode 31
12.2.1 Description of the programmed mode 31
12.2.2. Description of the steps of programming 32
12.2.3. Modifying temperature until the next switch in the program 34
13. Practical advices 35
14. Technical data 37
To Next Page
Loading...
