DMD1050 Satellite Modem Board Web Browser
Transmit / Reed-Solomon Menu
These selections are active only when the Reed-Solomon Option is installed.
Figure 7-11. Transmit / Reed-Solomon Menu
Reed-Solomon Control: {ENABLED, DISABLE}
Allows the user to Enable/Disable the Reed-Solomon Encoder.
Reed-Solomon Rate
N Value, K Value: {Refer to Table 3-1 for valid N/K values}
Displays the currently used n, k Reed-Solomon Codes. In
Closed Net Mode, the user may select custom R-S Codes.
Interleaver Depth: {4, 8, 12}
Allows the user to select the Reed-Solomon interleaver depth. In
Closed Net Mode, a depth of 4, 8 or 12 may be selected.
MN-DMD1050 7–18
Revision 9
To Next Page
Loading...