DMD1050 Satellite Modem Board Theory of Operation
3.7.1.8 Setting Up The DMD1050 Ethernet Bridge To Operate Like A FIFO
In certain circumstances, it may be desirable to have the Ethernet interface operate in a FIFO like
manner with no reordering of packets. This can be established by using a single port on the
Ethernet interface and setting the Ethernet QOS Type to Port Based and the Ethernet QOS Queue
to Strict Priority. When Setup and used in this manner, the packets will be transmitted in the exact
order in which they are received.
Figure 3-5. Point-to-Multipoint with Daisy Chaining
MN-DMD1050 3–12
Revision 9
To Next Page
Loading...