LCD illumination
The LCD back-light automatically extinguishes after 1 minute of inactivity; pressing any button illuminates the
back-light.
Setting the time and date
In the Smoke Screen Status or Current Time display press and hold Function/Escape for 3 seconds until the date
and time are shown with the Day flashing. Use the Up and Down buttons to change the value. Enter/Back saves a
change and moves to the next parameter and Function/Escape returns to the previous parameter without saving any
change. Repeated presses of Function/Escape will return the display to the higher level menu.
Accessing information and setting variable parameters
In the Smoke Screen Status or Current Time display press Enter/Back to access the variable parameters. Use the
Up and Down buttons to scroll through the available functions and Function/Escape to select items to change/view
each one as follows:
● Event Log. In the “Event Log” display press Enter/Back to show the latest event and the time of that event.
Use Up and Down buttons to scroll through the event log. Pressing Function/Escape will return the display
to the higher level menu. Events recorded are as per the Section “LCD, LED and Sound indications”.
● Setting Smoke Time. In the “Setting Smoke Time” display press Enter/Back to show the current smoke time
set. Use Up and Down buttons to move up and down to select a time between 5 and 360 seconds in 1
second intervals. Press Function/Escape to save the new setting and return to the higher level menu. Press
Enter/Back to return to the higher level menu without saving changes. The delivery Smoke Time Setting is
“5 seconds”.
To Next Page
Loading...