Section 8: Flavor System 3029-008B
8-6 Concordia Integra Technical Support Manual
2900-255B
Connecting Flavor Tubing
1. Open the flavor box at the “OPEN HERE” location, and
then extract the connector.
2. Remove the protective seal from the connector.
3. Clean the nozzle and o-ring thoroughly with a wet cloth,
to remove any debris, lubricate the o-ring, and remove
syrup or sauce residue.
NOTE: Re-inserting a dry o-ring may result in leaks.
4. Hold the connector firmly with your hand.
5. Insert the correct color-coded nozzle into the connector
firmly, until the nozzle handle clicks into place.
6. Purge the flavor tube to remove all air from the flavor
bag and the flavor tube.
WARNING: Do not try to insert the nozzle without holding
the connector, or the connector may be pushed into the box.
After verifying there are no air bubbles in the flavor tube, put
the flavor box in the flavor storage area; verify the tubing is
not pinched, kinked, or twisted.
To Next Page
