Conel FLOW CUT BOX - Declaration of Performance

EU - Declaration of Performance
No.: 0080913-C
accordingtoAnnexIIIoftheConstruconProductsRegulaonNo.305/2011dated01.07.2013
Manufacturer: CONEL GmbH
Margot-Kalinke-Str. 9
80939 München
Product type: FLOW CUT BOX
    Liingplantforwastewatercontainingfaecalmaerforlimited
    applicaonstoEN12050-3:2015
Idencaon of the
construcon product: Part number 07565214
Intended use or uses: Drainageoflocaonsbelowoodlevelinbuildingsandsitesto
    preventanybackowofwastewater.
Assessment: as set out in CPR, Annex V:
    1.1.4.System3und1.1.5System4(ref.3.1.Reacontore)
Declared performance: EN12050-3:2015.NoedtypetestlaboratoryNo.0197performed
    thedeterminaonoftheproduct-typeonthebasisoftypetesng.
    Cercatenumber:57214026
29